Information:
Country: Taiwan
Manufacturer: DENVER IND. CO., LTD
Group: Lathe
Control System: Without CNC
Web site: http://www.topdenver.com
Suppliers in your country: Suppliers
Technical specifications:
| MODEL |
HG-660 |
HG-760 |
HG-800 |
HG-840 |
|
| CAPACITY | Swing over bed |
660(25.98″) |
760(29.92″) |
800(31.5″) |
840(33″) |
| Swing over cross slide |
410(16.14″) |
510(20.08″) |
550(21.65″) |
590(23.23″) |
|
| Swing over gap |
930(36.61″) |
1030(40.55″) |
1070(42.13″) |
1110(43.7″) |
|
| Distance between centers |
1200(47.24″) 1700 (66.93″) 2200(86.61″) 3200(126″) 4200(165.35″) |
||||
| BED | Width of bed |
420 (16.54″) |
|||
| Width of gap (Spindle end face) |
305 ( 12″) |
||||
| Length of bed |
2600 (102.36″) 3100 (122″) 3600 (141.73″) 4600 (181.1″) 5600(220.47″) |
||||
| HEADSTOCK | Spindle bore |
ø80(3.15″) |
|||
| Number of spindle speeds |
12 steps |
||||
| Range of spindle speeds |
23-1300 r.p.m |
||||
| Spindle nose |
A1-8 |
||||
| CARRIAGE | Width of carriage |
570 (22.44″) |
|||
| Cross slide travel |
410 (16.14″) |
||||
| Compound rest travel |
HG-660 : 150 (5.9”) / HG-760 : 240 (9.45″ ) |
||||
| Max. size cutting size |
25 X 25 (0.98″X0.98″) |
||||
| TAILSTOCK | Diameter of barrel |
Ø 80 (3.15″) |
|||
| Travel of barrel |
200(7.87″) |
||||
| Taper of barrel |
MT 5 |
||||
| THREADS | Lead screw diameter & pitches |
Dia.45mm.Pitch 12mm / Dia.1.77″X2 T.P.I. |
|||
| Range of metric pitches |
0.8~14mm (65 Nos) |
||||
| Range of inch pitches |
2-28 T.P.I.(36 Nos) |
||||
| Range of diametral pitches |
4-56 D.P.(36 Nos) |
||||
| Range of module pitches |
0.5-7M.P.(22 Nos) |
||||
| FEEDS | Feed rod diameter |
32 (1.26″) |
|||
| Range of longitudinal feeds |
0.1~1.4mm/rev (0.0044″-0.5512″ in/rev) |
||||
| Range of cross feeds |
0.05~0.7mm/rev (0.002″-0.0276″ in/rev) |
||||
| MOTOR | Main spindle motor |
10HP (7.5kw) |
|||
| Coolant pump motor |
1/8 HP (0.1kw) |
||||
| Rapid motor |
1/4 HP (0.1875 kw) |
||||