Information:
Country: Taiwan
Manufacturer: GOODWAY MACHINE CORP.
Group: Lathe
Control System: Fanuc, MITSUBISHI
Web site: http://www.goodwaycnc.com
Suppliers in your country: Suppliers
Additional Information: With tailstock
Technical specifications:
| Capacity |
GCL-2 / L |
| Max. swing diameter |
Ø 400 mm |
| Swing over saddle |
Ø 280 mm |
| Max.turning diameter |
Ø 230 mm |
| Std.turning diameter |
Ø 220 mm |
| Max. turning length |
300 / 600 mm |
| Chuck size |
Ø 8″ |
| Bar capacity |
Ø 51 mm |
| Spindle |
GCL-2 / L |
| Hole through spindle |
Ø 66 mm |
| Spindle bearing diameter |
Ø 100 mm |
| Spindle nose |
A2-6 |
| Spindle motor type |
αP22 / 6,000i |
| Motor output ( Cont / 30 min. ) |
11 / 15 kW |
| Motor full output speed |
750 rpm |
| Spindle drive ratio |
Direct Belt Drive |
| Spindle speed ranges |
4,500 rpm |
| Spindle torque |
35.8 N-m |
| X & Z Axes |
GCL-2 / L |
| Max. X-axis travel |
125 mm |
| Max. Z-axis travel |
320 / 620 mm |
| X / Z axes rapids |
20 m/min. |
| Slide way type |
Hardened & Ground Box Ways |
| Feed rates |
1 ~ 4,800 mm/min. |
| X-axis servo motor |
AC 1.6 kW ( 2.1 HP , Fanuc α8B / 3,000i , Absolute encoder, 1,000,000/ rev. ) |
| Z-axis servo motor |
AC 1.6 kW ( 2.1 HP , Fanuc α8 / 3,000i , Absolute encoder, 1,000,000/ rev. ) |
| X-axis ball screw Ø [ pitch ] |
Ø 32 mm [ Pitch 6 ] |
| Z-axis ball screw Ø [ pitch ] |
Ø 32 mm [ Pitch 6 ] / Ø 36 mm [ Pitch 6 ] |
| X / Z axes thrust ( Cont. ) |
855 kg |
| Turret |
GCL-2 / L |
| Stations |
8 ( Opt. 12 ) |
| Indexing drive |
Fanuc AC servo motor |
| Indexing speed |
0.2 sec. ( Adjacent ) / 0.5 sec. ( Single step ) |
| Accuracy |
Positioning : ± 0.00069°, Repeatability : ± 0.00027° |
| O.D. tool shank size |
□ 25 mm ( □ 20 mm*1 ) |
| I.D. tool shank size |
Ø 32 mm |
| TAILSTOCK ( OPTIONAL ) |
GCL-2 / L |
| Quill center taper |
MT#4 ( Live center ) |
| Quill diameter [ travel ] |
Ø 70 mm [ Short : 80 mm / Long : 150 mm ] |
| Tailstock base travel |
200 / 400 mm |
| Programmable quill / base |
Yes / No |
| Programmable base type |
Manual |
| GENERAL |
GCL-2 / L |
| Positioning accuracy ( X / Y / Z ) |
± 0.005 mm |
| Repeatability ( X / Y / Z ) |
± 0.003 mm |
| Voltage / Power requirement |
AC 200 / 220 +10% to -15% 3 phase / 25 KVA |
| Hydraulic tank capacity |
40 L |
| Coolant tank capacity |
80 L |
| Coolant pump |
0.5 kW ( 0.65 HP , 60 Hz ) rated at 3 bar |
| Machine weight |
3,000 kg / 3,500 kg |
| Dimensions ( L x W x H ) |
2,180 x 1,300 x 1,635 mm / 2,480 x 1,300 x 1,635 mm |
| Control | |
| FANUC Oi-TD / MITSUBISHI 160 | |
